HEINZMANN Company Group

HEINZMANN
Engine & Turbine Management

HEINZMANN Electric Drives
Robust electric motors

HEINZMANN China
Control & Actuation

HEINZMANN Automation
Marine Automation

HEINZMANN UK
Gas & Water Turbine Control

HEINZMANN Australia
Steam Turbine Control

CPK Automotive
Emission Control

Giro Engineering
Diesel Engine Components

HEINZMANN IFT GmbH
Oil Mist Separators and Blow-by Filter Technology

REGULATEURS EUROPA

Thinking in control & monitoring

Control systems for diesel-electric and diesel-hydraulic locomotive of REGULATEURS EUROPA are characterised by precise speed governing and stable and reliable operation. Their compact and robustly designed hardware components are adapted to the harsh environmental conditions in locomotives. HEINZMANN locomotive control systems are installed worldwide, in both passenger and freight trains, and have been chosen by leading locomotive manufacturer for retrofitting.

 
loading...
Viking Traction Control
Viking Control Panel
Power Unit
RE 2221-1G
Viking35

Viking Traction Control

The Viking Traction Control unit is designed for the railway environment and houses the following main components:

  • Viking Digital Controller ECU
  • Speed switch pcb
  • Protection module
  • Interface circuitry

The engine protection provided by Viking Traction solutions provides de-rating with respect to measured parameters; this helps to ensure that the locomotive can continue to operate safely even if a fault is detected. As an additional feature Viking traction can interface with remote monitoring; thus, allowing operational problems to be viewed and diagnosed at the depot.

Viking Control Panel

Viking Control Panel Traction control panel with Viking35 ECU, performing the following core functionality:

  • Speed governing
  • Start interlocks
  • Engine auxiliaries control during starting/running/stopping conditions
  • 1st and 2nd stage engine protection
  • Overspeed protection
  • Independent engine shutdown by separate protection module

 

Power Unit

Provides regulated 28 VDC, 300 W power supply output for the traction control and monitoring units, derived from a power car supply input.

Protects components from power supply surges and transients in accordance with RIA12 requirements Includes a back up battery for short periods of loss of main power.

RE 2221-1G

The 2221 is a proportional actuator where the position of the output shaft is proportional to the electrical input signal 0-1 A. This actuator is typically used in medium/high-speed diesel engines in generator systems or locomotives.

Technical data

  • Output range ft lbf: 8, 12, 15, 25, 34
  • Output range Nm: 11, 16, 20, 34, 46, 54

More information

Data Sheet

Engine Types & Applications

Diesel Engines
Gensets
Locomotives
Steam Turbines

Viking35

An ECU with a high number of I/Os, suitable for a wide range of complex control and monitoring tasks in ships, locomotives and generators. The Viking35 has established itself as the ideal solution on the market for applications involving complex load sharing in particular. The user-friendly Viking Vision software or a corresponding hand-held device can be used to edit or display control and status parameters in real time. It is combined with hydraulic actuators from REGULATEURS EUROPA.

Technical data

  • Power supply: 24 VDC
  • Degree of protection: IP00

Engine Types & Applications

Diesel Engines
Dual-Fuel Engines
Turbines
Ships
Locomotives
Generators