Electro-Hydraulic Governors

REGULATEURS EUROPA is continously extending their hydraulic governor range. Latest development is a microprocessor controlled hydraulic governor, which combines the well proven RE hydraulic governors with a special developed HEINZMANN digital control.

Governor Description
Applications /
Engine Types
Documents
DG 2800.14
electro-hydraulic governnor DG 2800.14
The DG 2800.14 governor is a microprocessor controlled hydraulic governor for diesel or dual-fuel engines and steam turbines.
It consists of the well-proven REGULATEURS EUROPA 2800 series actuator and the HEINZMANN digital DC 14 governor.
The digital governor controls the proportional solenoid of the actuator by means of a current signal.
The DG 2800.14 includes an integrated speed pick-up, however if required an external pick-up can be connected.
The DC 14 digital governor provides state-of-the-art speed control (steady state speed wander < 0.1 % at nominal speed), start fuel limit and functionality typical for generator application, including isochronous load sharing (optional).
The software allows to set the gear ratio between crankshaft and governor drive. In this way all speed related settings in the software refer to “engine rpm”.
The DC 14 digital governor is set-up with the user-friendly interface program DcDesk.
Also 20 selectable parameters can be edited using the unit's key pad and display (password protected).
Marine certification pending.

Output range: 30 ft. lbf.

Medium-speed diesel engines
Dual-fuel engines
Steam turbines

Gensets
Marine

 

pdfData Sheet DG 2800.14