Digital Governors

HEINZMANN governors are recognised for their great reliability and durability along with their excellent performance. Available in a wide range, these speed governors are perfectly configurable in order to meet any application's requirements. Combined with the appropriate actuator, HEINZMANN control units make up high-quality governor systems for diesel engines, gas engines, dual fuel engines and gas turbines, water turbines, steam turbines.

Leaflet Digital
Governors

Control Unit

Description

Applications /
Engine Types

Documents

Viking35
governor ECU Viking 35

ECU with large range of I/O's for most diverse and complex control and monitoring tasks.

Operated in conjunction with the range of hydraulic actuators by REGULATEURS EUROPA.

Protection grade IP00
Power supply: 24 VDC

Diesel engines
Dual fuel engines
Turbines

Marine
Rail traction
Gensets

Data Sheet Viking35

Certificate DNV GL

Certificate RINA

Click for I/O Capacity

analogue input	analogue output	digital input	digital output	inductive or Hall pickup	RA232/ RS485	CAN
8x isolated, each channel selectable 0...20 mA 4...20 mA 0...5 V 0...10 V	8x isolated, each channel selectable 0...20 mA 4...20 mA 0...5 V 0...10 V	16x binary	8x relay 8x opto	2x	2x isolated	3x isolated

XIOS UC1

XIOS Universal Control

XIOS ECU Engine Control Unit IP6K9K

The modular, universal XIOS controller presents an entirely new generation of ECU. It consists of a high-performance main board with high CPU power, large DRAM and FLASH memory. A FPGA logic chip leaves more computing power to the CPU for PLC functions or processor-intensive control tasks. Additional I/O boards can be attached to the main board in different number and type. They are configurable by software, jumperless and small in size.
XIOS enables customers to develop their own control functions based on CoDeSys (IEC 61131-3) or MATLAB™/Simulink. It is applicable for alarm and monitoring purposes just as well.

32 Bit 264 MHz processor
Communication interfaces Ethernet, CAN, RS232, RS485
Optional 4.3" display
Protection grade IP00 or IP6K9K
Power supply: 9...32 VDC

Combustion engines
Turbines
Gensets

Leaftlet XIOS

Data Sheet XIOS

Click for I/O Capacity

The basic version of XIOS UC1 consits of the Main board (MC), extendable by up to 5 extension modules (MA).
I/O capacity of the XIOS main board:

analogue/digital input	digital output	Hall pickup	sensor supply
11x	2x, max. 4A	2x	1x (5 or 12 VDC configurable)

In addition to the main board, the XIOS Extension Board (MD) allows for another 6 extension modules to be plugged in.
I/O capacity of the XIOS extension board:

analogue/digital input	digital input	digital output	inductive pickup	sensor supply
8x	2x	2x, max. 4A	2x	1x (5 or 12 VDC configurable)

Each of the Extension Modules provides 2 (if isolated), 4 or 8 (if input-only) I/O channels, resulting in a great variety of
configuration options:

Module type	Function
A2	4x analogue or digital output, monitored, 0...5 VDC (11 mA), 0...24 mA digital output, max. 1 A PWM controlled (0...100 %)
A3	4x analogue or digital input, 0...5/10/36 VDC, 0...24 mA temperature input Pt1000, Pt200, Pt100, Ni1000, NTC 2x sensor supply (5/12 VDC configurable, 50 mA or VBAT)
A4	2x analogue or digital input, electrically isolated, 0...5/10/36 VDC, 0...24 mA temperature input Pt1000, Pt200, Pt100, Ni1000, NTC 2x sensor supply (5 VDC, 50 mA)
A5	2x analogue or digital output, electrically isolated, 0...5 VDC (2.5 mA), 0...24 mA digital output: 60 VDC/40 VAC, 400 mA static, optional: 400 VDC/280 VAC, 100 mA
A6	2x analogue or digital output, electrically isolated, monitored, 0...5 VDC (10 mA), 0...24 mA
A7	8x digital input, 9...36 VDC
A8	up to 4x digital output, high- or low-side, current read back for control-loop applications, thermal shutdown

A1	2x thermocouple amplifier, electrically isolated, (J/K/E/R/S/B/N), configurable gain and offset
A9	1x H bridge output, up to 8 A static current, current read back for control-loop applications

DC 6-200
speed governor DC 6-200

Low current version of DC 6, combined with small actuators requiring drive currents up to 200 mA, suitable for proportional electro-mechanical actuators, operating as positioner.

Power supply: 12 VDC, 24 VDC
Protection grade IP00

Gas turbines
Steam turbines
Water turbines

Gensets
Heat pumps

Data Sheet DC 6-200

Click for I/O Capacity

	analogue input	analogue output	digital input	digital output	inductive pickup	Hall pickup	PWM input	PWM output	tempera- ture input	alarm output	CAN
Port 1&2	0...5 V 0...10 V 4...20 mA
		4...20 mA
			X
				X
							X
								X
Port 3	0...5 V 4...20 mA
Port 3			X
Port 4			X
Port 5			X
						X
							X
Else									1x Pt1000 or NTC
					X
										X
											X

DC 8

Operating as part of speed governor system together with actuators StG 2010/2040/2080.
Positioner capability and power management function, applicable as peripheral module to extend I/O abilities of main control unit and to drive another actuator.
Version for marine propulsion engines available with output 0-1 A, driving the range of RE hydraulic actuators.

Power supply: 24 VDC
Protection grade IP00
Galvanically insulated CAN bus interface

Diesel engines
Gas engines
Turbines

Gensets
Heavy-duty vehicles

Data Sheet DC 8

Click for I/O Capacity

	analogue input	analogue output	digital input	digital output	inductive pickup	PWM input	PWM output	tempera- ture input	alarm output	CAN
Port 1	4...20 mA (isolated)
Port 2 & 3	0...5 V 0...10 V (Isolated)					X
Port 2 & 3
Else	3x 4...20mA 0...5 V / 0...10 V	1x 4...20mA (isolated)	8x (6x isolated)	5x (3x isolated)	2x		1x	2x Pt1000 or NTC or Ni1000	6x status LED	2x (1x isolated)